Washing Machine queston - Page 3

CelticCrafter · ‎03-09-2010

We had a GE washer and I swore up and down I would never buy another one because of the noise.

When it needed to be replaced, January 2020 GE was the only brand that did what I wanted it to do - water level, water temperature, top load with an agitator.

I hate it just as much as I hated the old one but for different reasons. It goes out of balance at least once a week, so it needs to be baby sat for fear that it will dance across the floor and disconnect the water hoses.

deeva · ‎03-09-2010

I just replaced my 9 year old Lg washer with another one. I really like them.
To the poster who said you cannot adjust the water level, the size of the load determines the water level.

Both washers didn't have an agitator, and I don't miss them at all.

chickenbutt · ‎03-09-2010

I got GE this time (some time in the last couple yrs) and it's been good. Definitely a learning curve if one has older machines.

One big thing for me, where I actually lucked out that it's on the machine because I didn't know about it ahead of time, is to make sure it has some sort of 'extra fill' setting, since they don't fill as much as they used to.

I have a top-loader, because that's what I like. It doesn't have the agitator thing and I think that's a plus. If I don't put things in exactly even it evens itself out easily because there is no agitator in the middle.

But the biggest thing is the extra fill (or whatever it's called on a given machine). The GE ones I got are made in the US, which surprised me, as I tend to assume most electronics/etc are made elsewhere.

So far, I have no complaints. Well, except that they are deeper than they used to be. Early on I was emptying the machine and had to bend way over to get something on the bottom (I'm only 5'4", if that) and had on a underwire bra. Well, somehow or other the wire got jammed into my ribs and I had a minor injury. After that I put a set of long tongs that I have, and never use anyway as I use the regular length ones, in the laundry room. I put a hook on the wall by the washer to hang them so they are always there. Moral of story: Don't wear an underwire when emptying washer OR get a grabby thing or set of tongs for the job.

Marp · ‎03-09-2010

@Cakers3 wrote:
As far a bending to load/unload a front end, there are platforms (DH made ours).

I have no problem and I have a back issue.

You still have to front load any dryer anyway - are there top loading dryers?
I have never seen one.

@Cakers3 Likewise, a "top load dryer" is meant to match with a top load washer. It will generally include backguard controls and similar styling for its matching washer. These laundry pairs are usually not stackable. Here's an example pair from Maytag:

Top Load Dryer vs Front Load Dryer_Maytag MEDB765FC Top Load Dryer with Washer

Notice the corresponding styling and similar control setup on the backguards. Traditional dryers don't always have windows like the model pictured above, while a front load dryer almost always has a window of some kind! If you're looking for the least expensive laundry pairs out there, your best bet is usually a top load washer and a top load styled dryer. Front load washer dryer pairs tend to look nicer and have more features, making them more expensive.

More information: blog.bellinghamelectric.com/blog/top-load-dryer-vs-front-load-what-is-a-front-load-dryer

What is good for the goose today will also be good for the gander tomorrow.

brandiwine · ‎03-11-2010

Stay away from Samsung appliances. Everything is junk!! Look at Maytag, Whirlpool, or GE. Don't forget to check prices at Costco.

Shelbelle · ‎03-09-2010

I agree to stay from Samsung. My friend had one, had issues and could not even find a repairman who was willing to touch it.

I go with old faithfuls like Maytag, GE, Whirlpool, or Hotpoint which is made by GE, and more budget priced.

Lipstickdiva · ‎03-10-2010

I have a Samsung front load washer and dryer. I've never had an issue with either of them. This set replaced a Maytag that was from the late 70's. The dryer is what broke and we couldn't get a high efficiency dryer without an HE washer.

Before we bought what we bought, we researched because my DH often gets very muddy/dirty at work. Through our research and advice from the salesperson, we decided against a top loading agitator free machine. The clothes just sit in a big lump on top of each other and don't get super clean. We have no issue with any of his muddy clothes still coming out dirty.

It's funny how different repair people will tell you things differently. We bought a GE stove and it has been junk since the day we bought it. When we had someone come out, he said GE is not a quality product anymore. I know other people who have had nothing but issues with GE. That is not a brand that will be coming into my home anymore. I wouldn't hesitate to buy another Samsung.

@lulu1 , my best friend's last washer lasted 4 years and the one prior lasted 7 years. They weren't worth fixing. She was livid.

Effie54 · ‎09-08-2010

I have a new LG washer and dryer. I love them. What's not to like about them? They work great. We had Whirlpool....lasted all of 5 years, then they both died. I only use a top loader. We had a front loader and our clothes were always bunched up when I took them out of the washer.

gertrudecloset · ‎02-13-2021

@Marp wrote:
@Cakers3 wrote:
As far a bending to load/unload a front end, there are platforms (DH made ours).

I have no problem and I have a back issue.

You still have to front load any dryer anyway - are there top loading dryers?
I have never seen one.

@Cakers3 Likewise, a "top load dryer" is meant to match with a top load washer. It will generally include backguard controls and similar styling for its matching washer. These laundry pairs are usually not stackable. Here's an example pair from Maytag:

Notice the corresponding styling and similar control setup on the backguards. Traditional dryers don't always have windows like the model pictured above, while a front load dryer almost always has a window of some kind! If you're looking for the least expensive laundry pairs out there, your best bet is usually a top load washer and a top load styled dryer. Front load washer dryer pairs tend to look nicer and have more features, making them more expensive.

More information: blog.bellinghamelectric.com/blog/top-load-dryer-vs-front-load-what-is-a-front-load-dryer

@MarpMy front load dryer does not have a window. It's a GE.

A Negative Mind ~ Will give you a Negative Life

songbird · ‎03-21-2010

The front loaders don't seem to clean the clothes very well. What it's good for is the control of the water. You don't have to have a lot of water for the front loader (like you have to with the top loader) At any rate, so far it has to be a top loader. Oh, and an agitator. I can't seem to find a Speed Queen. We tried at Lowes, but couldn't find them. Lowes is kind of crummy. Some of the models have free shipping, some of them don't. Our dryer by the way, is still running. 20 years later. Great dryer. Whirlpool.