Reply
Regular Contributor
Posts: 180
Registered: ‎04-17-2010

don aslett tub and tile cleaner

Hi everyone!

I have the Don Aslett T3 Tub and Tile cleaner but no longer have the original spray bottle. Does anyone know the product to water ratio so that i can make a new spray bottle ?

Thank you

Respected Contributor
Posts: 4,719
Registered: ‎03-19-2010

Re: don aslett tub and tile cleaner

  • Includes one 32-oz T3 Tub n' Tile Cleaner Concentrate, one 32-oz empty dilution bottle with professional-grade foaming nozzle, and two hourglass-shaped scrubbing pads
  • Concentrate makes up to 8 quarts
  • Rubber gloves recommended while using
Esteemed Contributor
Posts: 6,788
Registered: ‎08-18-2016

Re: don aslett tub and tile cleaner

@Merciful One, take your question to the Don Aslett website.
Honored Contributor
Posts: 21,845
Registered: ‎10-03-2011

Re: don aslett tub and tile cleaner

@Merciful One  No need to take your question to the Don Aslett website.  @Hoovermom already provided the two key parts of the equation.  You get a 32 oz. bottle of concentrate which will make 8 quarts of solution.  That said, it would take 4 oz. of concetrate to make 1 quart.

Respected Contributor
Posts: 3,458
Registered: ‎06-10-2015

Re: don aslett tub and tile cleaner

Here are the directions from the Aslett Clean Report site for Tub n' Tile Concentrate, which appears to be the same product:

 

NOTE: Contains acid. Not recommended for use on metal such as chrome fixtures and aluminum trim or on natural stone surfaces that are sensitive to acid. DO NOT MIX WITH BLEACH

 

INSTRUCTIONS FOR USE:

Simply spray diluted Tub ‘n’ Tile giving the foam a few minutes to loosen deposits. Follow up with a light scrubbing. Bathroom grime is gone!
Directions:

  • Pour 4 oz in a quart spray bottle and finish filling with water (if using the matching spray bottle – fill to the red arrow indicated on the back of the Ready to Use bottle and fill the rest with water)
  • Apply directly to surface to be cleaned and lightly spread foam with scrubber to coat the area
  • Allow 2 – 4 minutes for cleaner to penetrate soil
  • Agitate as needed, depending on the amount of buildup and rinse thoroughly with water.

 

Regular Contributor
Posts: 180
Registered: ‎04-17-2010

Re: don aslett tub and tile cleaner

Thanks so much Noodleann !


That is helpful Woman Happy  Woman Happy