Reply
Highlighted
Contributor
Posts: 68
Registered: ‎08-24-2013

Advice on removing plastic like coating on new sheets

I have been a Northern Nights sheet fan for years but lately my purchases seem to have a coating on them that even multiple washings will not remove.. I have even tried adding baking soda to my washing machine..... any suggestions would be appreciated... Thank You!

Honored Contributor
Posts: 15,315
Registered: ‎05-22-2016

Re: Advice on removing plastic like coating on new sheets

I like to use ammonia (about 1/4 to 1/2 cup) when I wash my sheets. Do not use ammonia with bleach. Just add ammonia to the wash with regular detergent. The ammonia cuts body oils, lotions and any other organic substance that might be soiling your sheets. It will also remove build-up of any softeners you might be using. Imo, the sheets come out brighter and cleaner. 

Respected Contributor
Posts: 3,745
Registered: ‎12-24-2010

Re: Advice on removing plastic like coating on new sheets

Don't the no wrinkle sheets have to be treated with something?  I bought a sheet set from Q with that feature - gave them away - they seemed extra heavy - I had to run each sheet (queen) separately.  That was extra water and electric use - figured over time they would cost more to maintain than ditch them now.

Respected Contributor
Posts: 4,692
Registered: ‎03-09-2010

Re: Advice on removing plastic like coating on new sheets

I once bought a set of Threshold sheets from Target and my husband wanted to know if I used plastic shower curtains to make the bed!

They were so awful and no amount of multiple washings did anything to make them better.  

Honored Contributor
Posts: 10,338
Registered: ‎03-10-2010

Re: Advice on removing plastic like coating on new sheets

I would probably return sheets that felt like they had a plastic coating on them.  I like very soft cotton sheets.

My little dog, a heartbeat at my feet. —Edith Wharton
What greater gift than the love of a cat.--Charles Dickens





Contributor
Posts: 68
Registered: ‎08-24-2013

Re: Advice on removing plastic like coating on new sheets

Thanks.. I will try it... I have bought Northern Nights sheets for many years and have never come across this issue until now. Thanks again.

Esteemed Contributor
Posts: 6,109
Registered: ‎03-09-2010

Re: Advice on removing plastic like coating on new sheets

@CelticCrafter, I know exactly what you mean about the plastic feel to Target threshold sheets.  Not good!  LM

Esteemed Contributor
Posts: 5,791
Registered: ‎03-09-2010

Re: Advice on removing plastic like coating on new sheets

I have been using Threshold sheets/Target.  I have had no problem with them.  They was nicely and not wrinkled when they come out of the dryer.

Trusted Contributor
Posts: 1,331
Registered: ‎06-02-2010

Re: Advice on removing plastic like coating on new sheets

@5941  Would you mind checking the tag and letting us know what the sheets are made of?  I would like to know so I can check before purchasing new sheets.  

 

Used to be only cotton, but now I see polyester, modal, viscose, tencel, etc..

 

 



......You look like I need a drink.....